Travels - X Axis: 22.8"
- Y Axis: 14.1"
- Z Axis: 17.7"
Spindle Speeds: 60-6000 RPM
Spindle Taper: NST40
Tool Magazine Cap.: 20 ATC
Tool size: 3.5" x 11.8"
Tool Weight: 8 kgf
Control: Fanuc OM | - Max. load on table: 1100 lbs.
- Height of spindle nose end from
- table top: 5.9" - 23.6"
- Distance from front face of column
- to center of spindle: 16.1"
- Raid traverse - X, Y Axis: 629 IPM
- Z Axis: 472 IPM
- Feed speed: 1 - 5,000 IPM
- Height of table top from floor: 31.8"
- Tool selection: Electonic random access
- Time needed for tool change -
- Tool to Tool: 3 seconds
- Chip to Chip: 6 - 8 seconds
- Controlled type: Positioning, linear/circular
- interpolation
- Controlled axis: 3 (simultaneously 3 axis)
- Thrust & lead screw replaced.
- Late 1980's machine.
- Available manuals.
|